Jura Error Codes
Jura Error 7: Ceramic Valve, Encoder or Brew Group Malfunction
The following parts may be the cause of the problem:
The Brew Group Encoder cannot be activated. The Encoder (sits on the Gear Motor) is defective. The Power Board informs the Encoder the brew process has begun, which in turn, dictates the positioning of the Brew Group, via the Gear Motor.
Visually inspect the Encoder and wires to Encoder for damage/corrosion. Replace Encoder.
The Ceramic Valve cannot obtain the proper position. You may hear the motor continuously turning. The motor of the Ceramic Valve may be damaged/corroded from an internal leak, or it is filled with scale and cannot properly switch the fluid path.
Replace Ceramic Valve.
The Brew Group Cannot be activated.
See "Error Code 8."
Possible Faulty Parts:
Fix:
Repair Services
Want us to baby your baby?
Your Jura coffee machine was built to last; however, it will need a tune-up from time-to-time. Even a Porsche has a limited number of miles it can drive before the oil needs to be changed. We offer a comprehensive repair/refurbishing service to get your coffee machine operating at its peak capacity, again.
​